FireWatcher 122 Remote LCD Annunciator



The FW122 FireWatcher is an intelligent remote annunciator designed to be used with the FW106 (or FW106S) fire alarm control panel. The LCD can display 8 events simultaneously. Users can browse more events by pressing the up/down buttons until the first event message is reached.

Product Documents


Events are displayed according to the following rules:

  1. Events priority: Alarm > Supervisory > Trouble > Other Signal > Output
  2. Within events of the same priority, all events are displayed in order of occurrence, the latest being displayed first. However, the sequence of alarm event is configurable.

The FW122 is connected to the FW106 via the external network to form a fire emergency detection and notification network system. Up to 109 FW122 can be addressed by the communication circuit.

The 7″ display shows up to 8 lines at a time.



    • Digital signal processor based design
    • UL / ULC listed
    • Fully configurable from the panel with password protection
    • 24v DC operation
    • Up to 109 Annunciators for each panel
    • Large 7″ LCD display with 800×480 resolution
    • Available in Red or Dark Grey

    The AMI is the main control unit of FW122 annunciator, which integrates the CPU board, 4 Signal status LEDs, 5 system status LEDs, 4 navigation buttons and 1 enter button, 6 functionality buttons and a buzzer. Includes: CPU board, LCD, Keypad, LED, buzzer, etc

    Annunciator address is set through configurator software. The FW106 control panel communicates with up to 109 FW122 annunciators. Class B network is supported.

Logo-UL_Rouge    Logo-ULC_Rouge     Logo-FM     Logo-FCC

Additional information

Weight 5 kg
Dimensions 50 × 17 × 30 cm

Gray, Red

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.